Jyoti H 171A is an electric insulating heat curing impregnating varnish based on polyesterimide. The material does not contain by recipe substances listed in Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC).
PROPERTIES OF CURED MATERIAL
The cured material displays very good resistance to chemicals and high thermal stress. Owing to its temperature index of 180 – 200, JYOTI H 171 A can be used for machines in thermal class H. A reduction in the degree of hardness of enamelled wires generally used does not occur if the components are properly impregnated. Its suitability for the “increased safety” level of protection (Ex)e is attested by PTB III B/C-2041 U.
- Traction motors
- Centrifugal moto
- Generat
- Transformers
- Cooling mac
- Cooling mac
- Drives for Mines
APPLICATION METHODS
The cured material displays very good film formation and resistance to chemicals. The relatively elastic varnish film has very favorable temperature cycling behavior. A reduction in the degree of hardness of enameled wires generally used does not occur if the components are property impregnated.
APPLICATION METHOD
JYOTI F-157 is processed by all conventional impregnating methods, such as dipping, rolling or flooding. It can also be processed under vacuum. In this case, the vacuum should not drop below 20 mbar to avoid high solvent evaporation. The most advantageous impregnating method in each case depends on the given technical possibilities of the plant, the structure of the components, and the demands placed on the object to be impregnated under operating conditions.
JYOTI F-157 displays low susceptibility to the influence of foreign substances, such as
punching grease, oils or primers, however, contamination of the varnish should be avoided as much as possible. After drainage time of 15-45 minutes at room temperature, the product is cured in the circulating-air oven at the temperatures and periods of time given. For large objects or those with a complicated winding structure a two-stage curing process is recommended to ensure removal of the solvents.
